Turret camera
Our most popular camera. The lens sits in a ball-style housing with no glass dome over it, so there is no night-time glare or reflection.
TSG Electrical and Security Solution designs, installs, and programs camera systems, alarms, access control, and intercoms for homes, shops, and offices. We run the cabling, set up the recorder, connect everything to your phone, and walk you through it before we leave.
Tap what you need to start a quote
Security and CCTV are the core of what we do — backed by the low-voltage and electrical work needed to get them wired in.
Complete security design and installation for homes and businesses: IP camera systems with NVR recording, intrusion and fire alarm panels, access control, and video intercoms. Every system is programmed, tested, and connected to your phone before we hand it over.
The infrastructure behind every reliable system. We pull and terminate Cat6 home runs, build out structured media panels, and install PoE switches so cameras, access points, and smart devices have clean, labelled connections, ideally before the walls close up.
Electrical service for homes and small commercial spaces: troubleshooting, repairs, and the dedicated power needed for cameras, access control panels, and door operators, completed to current code.
Record and Ditec automatic door operators for entrances, restrooms, double doors, and interior doors, with push-to-open buttons and occupied lights.
A sample of what shows up on a typical job — installed, programmed, and tested before we call it done.
Every property is different. Here are the IP camera types we install most, what each one does best, and the features to look for.
Our most popular camera. The lens sits in a ball-style housing with no glass dome over it, so there is no night-time glare or reflection.
A long, visible camera that mounts to a wall and points down a line of sight. Its shape alone tells people the property is monitored.
A low-profile camera under a tough, tinted dome. Harder to tamper with, and people cannot easily tell which way it is pointing.
Pan, tilt, and zoom from your phone or recorder. One PTZ can cover a large area and zoom in on plates or faces when needed.
One ceiling camera that sees the whole room at once, with no blind spots. The view can be split into normal-looking angles in the app.
See and talk to whoever is at the door, from your phone or an indoor monitor. Can be paired with door release for access control.
4MP is sharp for most homes. 8MP (4K) gives more detail for reading plates or covering wider areas.
Infrared gives clear black-and-white at night. Color night vision uses a soft light or a sensitive sensor to keep full color.
Power over Ethernet sends power and video down one network cable. No outlet needed at the camera.
A built-in mic and speaker let you listen and talk through the camera from your phone.
Cameras record to an NVR (network recorder) on site, so footage is kept even if the internet goes down.
Person and vehicle detection cut down false alerts from trees, rain, or animals.
* Available on select models. We'll recommend the right model for each spot during your free estimate.
See and talk to whoever is at your door, then let them in with one tap. We install the outdoor door station and indoor monitor, run the cabling, and set up the phone app.
Choose how many cameras you need, then your recorder, hard drive, and monitor. We'll confirm everything on site and send a clear quote.
Photos from our own installs, organized by job type. Each project lists the property type and the scope of work we completed. Tap a category to filter.
IP camera systems for homes, construction sites, and commercial properties, from site survey and camera placement to NVR setup and phone viewing.
Hikvision video intercoms that let you see, talk to, and let in visitors from an indoor monitor or your phone.
Access control and alarm panels installed in secure enclosures, with battery backup and every circuit clearly labelled.
Structured cabling and network gear that everything else runs on: cameras, intercoms, access points, and smart devices.
Rough-in work completed before insulation and drywall, so everything is in the right place when the walls close up.
Walk the site, understand the goal, flag anything code requires.
A clear, itemized quote — no surprise line items later.
Wiring, devices, and panels installed and programmed on schedule.
Everything tested live, walked through with you, and documented.
Every job is labeled, tested, and left in a state the next tech can pick up cold — security panels programmed with documented codes, low-voltage runs labeled at both ends, electrical work left up to code.
Pay an invoice or a booking deposit online with your credit or debit card. It takes about a minute, and you get an email receipt right away.
Quick answers before you reach out. Anything else, just call or text.
Yes. We come out, look at the property, and give you a clear, itemized quote before any work starts.
Yes. We set up the recorder and the phone app for you, and show you how to view live and recorded footage before we leave.
Both. We install systems for houses, shops, offices, and new builds.
Often, yes. Tell us what you have now and we will let you know what can be kept, upgraded, or replaced.
It depends on the size of the job and how the wiring can be run. You will get a timeline along with your quote.
Yes. Use the Pay Online section to pay an invoice or a booking deposit with Visa, Mastercard, or American Express. Your card is entered on a secure checkout page, and you get an email receipt.
Just a rough idea of what you want covered. If you can, send a few photos of the areas or your current panel by text or email.
Send the basics and we'll follow up to schedule a walkthrough or quote.
We install and set up Record and Ditec automatic door operators for entrances, restrooms, double doors, and interior doors, complete with push-to-open buttons, occupied lights, locks, and sensors.
Tell us which doors you want automated. We'll recommend the right operator and accessories for each one.
Swing operator on your main entry, with push-to-open buttons inside and outside. The door opens slowly, holds, then closes on its own.
Accessible washroom setup. Push the outside button to open. Inside, press the lock button: the door locks and the outside "Occupied" light turns on. Press again to unlock and open.
Two synchronized operators on a pair of doors, so both leaves open together from one button press.
Low-energy operators on interior doors, including heavy doors that are hard to push. Can release to close when the fire alarm sounds.
Door opens only after a valid card, fob, or intercom unlock. Pairs with the access control and Hikvision intercom systems we install.
One button to get in, one to lock, and a light outside so nobody walks in on anyone.
Round 4.5" and square 6" wall buttons, plus tall jamb-mount bars that are easy to hit with an elbow or wheelchair.
Battery-powered buttons with a receiver, for spots where running a wire is hard.
Inside lock button, outside push button, and an "Occupied" indicator light, all wired to the operator and lock.
Locks the door when needed and releases it before the operator opens it.
Sensors that stop or slow the door if someone is standing in its path.
Set the door to automatic, hold open, or off, and lock out the operator after hours.
We check the door, frame, closer, and power, and decide what buttons and locks you need.
Mount the Record or Ditec operator and arm, and adjust or remove the old closer.
Install push buttons, sensors, locks, and indicator lights, and run the low-voltage wiring.
Set opening speed, hold-open time, and closing force for your door.
Test every function, and show your staff how to use and switch modes.
Operators are set up to the manufacturer's instructions and applicable safety standards for power-operated doors.
Send us a photo of the door and we'll let you know what it needs.